Kenwood KDC-4751SD - Manual (Page 30)

30
English
STEERING WHEEL
REMOTE INPUT
MUTE
ANT. CONT
P.CONT
REMOTE CONT
L R
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Antenna Cord
FM/AM antenna
input (JASO)
Pin Color and function Pin Color and function
A4 Yellow Battery B1 / B2 Purple ª / Purple/black · Rear speaker (right)
A5 Blue/White Power control B3 / B4 Gray ª / Gray/black · Front speaker (right)
A7 Red Ignition (ACC) B5 / B6 White ª / White/black · Front speaker (left)
A8 Black Earth (ground) connection B7 / B8 Green ª / Green/black · Rear speaker (left)
Rear output/ Sub Woofer output
switchable (page 7)
Microphone (KCA-MC10 ;
optional accessory)
(KDC-BT41U only)
Light Blue/Yellow
(Steering remote
control wire)
Brown
(Mute control wire)
Blue/White
(Power control/
Antenna control wire)
Red (A–7 Pin)
Yellow (A–4 Pin)
Yellow (Battery wire)
Yellow (Battery wire) Yellow (A–4 Pin)
Vehicle Unit
Default wiring
Red (Ignition wire)
Red (Ignition wire) Red (A–7 Pin)
To use the steering wheel remote control feature,
you need to an exclusive remote adapter (not
supplied) matches your car is required.
To connect the Kenwood navigation system, consult
your navigation manual.
(Connect to the terminal that is grounded when
either the telephone rings or during conversation.
KDC-4751SD only)
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vehicle.
If no connections are made, do not let the wire come out from the
tab.
Wiring
harness
D
Fuse (10A)
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Wiring connection
Connector A
Connector B
USB connector
AUX input (Stereo)
Use the mini-plug (3.5 mm ø) cable
which is stereo type and does not have
any resistance.
B64-4799-10_01_E_English.indd 30 B64-4799-10_01_E_English.indd 30 11/01/06 15:05 11/01/06 15:05