Static ip address on the computer, Windows 98 se – Actiontec electronic GT701-WG User Manual
Page 108
Advertising
![background image](/manuals/41288/108/background.png)
105
Static IP Address
on the Computer
To communicate with the Gateway from a computer on the network (to use the
Web Configuration Utility, for example), the user may have to switch the
IP
address
settings from
DHCP
-enabled to static
IP
, so that the computer and the Gateway are
on the same subnet.
To set up static
IP
on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Gateway’s
factory default
IP
address. If the Gateway’s
IP
address has been
changed, enter the new
IP
address when instructed to enter an
IP
address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
B
Advertising