Actiontec electronic GT701-WG User Manual
Page 52
Advertising
![background image](/manuals/41288/52/background.png)
48
Actiontec 54 Mbps Wireless DSL Gateway User Manual
49
Chapter 5 Setting Up Static IP
5. Scroll down to the IP Configuration section on the existing page, click on the
circle next to “Static,” and enter the IP address obtained from the
ISP
work-
sheet in the IP text box.
☞
Note: The “Subnet” and “Gateway” text boxes are not used dur-
ing this procedure.
6. If provided with
DNS
settings on the
ISP
worksheet, click the circle next to
“Static” and enter the DNS addresses in the “
DNS
Configuration” section at
the bottom of the Actiontec
DSL
Modem Setup Page screen.
If no
DNS
settings were provided, go to step
7
.
7. Click “Save and Restart” at the bottom of the screen.
Advertising