Actiontec electronic GT701-WG - Manual (Page 58)

54
Actiontec 54 Mbps Wireless DSL Gateway User Manual
55
Chapter 5 Setting Up Static IP
12. The “Change Admin Password” screen appears. Enter a new password in the
“New Password” text box, and re-enter the password in the “Re-enter New
Password” text box. Make sure to write this password down and keep it in a
secure location. This password will be needed to access to the Gateway’s Web
setup screens.
13. Click “Save and Restart” at the bottom of the screen.
14. The “Save and Restart” page appears. Click “Save and Restart” to save the set-
tings changed in the Change Admin Password screen.
The Gateway has been configured to support a block of static IP addresses. Once
the Power light stops blinking, the Gateway is ready for use.