Actiontec electronic GT701-WG - Manual (Page 56)

52
Actiontec 54 Mbps Wireless DSL Gateway User Manual
53
Chapter 5 Setting Up Static IP
6. Select “Obtain an IP Address through PPP o A ,” select “Unnumbered Mode,”
then enter the gateway and subnet mask addresses assigned by the ISP in the
“Gateway Address” and “Unnumbered Subnet Mask” text boxes, respectively.
These addresses should be included on the
ISP worksheet. Click Next.
7. In the “Broadband Connection via PPP o A ” screen, enter the user name and
password assigned by the ISP in the appropriate text boxes, then click Next
four times.