Actiontec electronic GT701-WG User Manual
Page 69
66
Actiontec 54 Mbps Wireless DSL Gateway User Manual
67
Chapter 6 Advanced Setup
WEP+802.1x
Activating WEP+802.1x and clicking Next in the Wireless Settings screen gener-
ates the “Wireless 802.1x Security Settings” screen. This setting is for enterprise
networks only, and should be accessed by experienced information systems spe-
cialists only.
To set up
WEP+802.1
x security, enter the
IP
address of the
RADIUS
server in the
“Server IP Address” text box, and the “Secret” key (for communication between
the
RADIUS
server and the Router) in the “Secret” text box. The “Port” and
“Group Key Interval” values should remain the same
WPA
Activating WPA (
W
i-Fi Protected Access) and clicking Next in the Wireless
Settings screen generates the “Wireless
WPA
Settings” screen.
There are two levels of
WPA
. The “Group Key Interval,” “Server
IP
Address,”
“Port,” and “Secret” text boxes, along with the “
802.1
x” radio button, are enter-
prise network specific, and should only be accessed by an experienced informa-
tion systems professional. See “
WEP+802.1
x” on the previous page for more
information.