Actiontec electronic GT701-WG - Manual (Page 122)

118
Actiontec 54 Mbps Wireless DSL Gateway User Manual
119
Appendix B Static IP on the Computer
11. Enter the following numbers in the “ IP Address” text box:
192.168.0.2
Press the space bar on the keyboard to add the periods between the numbers.
12. Enter the following numbers in the “Subnet mask” text box:
255.255.255.0
Press the space bar on the keyboard to add the periods between the numbers.
13. Click OK . The Internet Protocol ( TCP/IP ) Properties window disappears.
14 In the Local Area Connection Properties window, click OK. The Local Area
Connection Properties window disappears.
15. Click Close in the Local Area Connection Status window. The window
disappears.
16. Close the Network and Dial-up Connections window by clicking on the “x”
button at the upper right corner of the window.
The computer is now set up with a static IP address, allowing the user to access the
Modem’s Advanced Setup utility.