Actiontec electronic GT701-WG User Manual
Page 57
54
Actiontec 54 Mbps Wireless DSL Gateway User Manual
55
Chapter 5 Setting Up Static IP
8. In the “
DHCP
Server Configuration” screen, select “Static” from the
“
DNS
” options near the center of the screen, then enter the
DNS
Server
IP
addresses assigned by the
ISP
in the appropriate text boxes.
☞
Note: If the ISP did not provide static DNS addresses, leave the
DNS option at “Dynamic.” Also, if the
DHCP
server option
is turned off, this screen will not appear. The Gateway will
obtain dynamically assigned
DNS
addresses if supported by
the
ISP
with static
IP
addresses.
9. Click “Save and Restart” from the menu on the left side.
10. The “Save and Restart” page appears. Click “Save and Restart” to save the set-
tings.
11. Once the Gateway restarts, return to the Setup/Configuration screen and
select Change Admin Password from the menu on the left side.