Lyndex-Nikken Shrink Fit Machine Instructions - Manual (Page 3)

ELCO Shrink fit unit Start.2 27/04/2010
Page 3/19
1 – DESCRIPTIVE
1.1 Nomenclature
The shrink fit unit Start.2 is composed of an induction generator, an inductor, and a
separate remote control.
Mark Designation Mark Designation
A1 Inductor
A2 Inductor stop
A3 Chuck holder
A4 Inductor handle B5 Optional cooling switch
A5 Inductor switch B5-1 Optional « cooling » green light
A6 Main switch B6 Optional « cooling » switch
A7 « Ready » green light B6-1 Optional « cooling » green light
A8 « Default » red light
A9 Selector C1 Separate remote control
A10 « Inductor » yellow light C2 Sub-D plug
A12 « blocking » orange light
A13 Strutting piece for the chuck holder Jack 3.5 output – 24Vcc – 0.2A
A1
A2
A133
A4
A3
C1
A6
A9
A9-1 A9-2
B6-1
B6
A12 A7
A10
A8
B5-1
B5
C2