MagTek Excella, MICR Check Reader99875310 - Manual (Page 12)

Excella MICR Check Reader
6
INSTALLATION SUMMARY
This is a summary of the major installation steps for Excella:
1. Unpack Excella
2. Install ink cartridge (the cartridge is shipped uninstalled)
3. Install API/Demo software (CD provided by MagTek)
4. Connect interface cable (USB or Ethernet) and power cable to Excella
5. Connect power cord to AC wall outlet
6. Connect interface cable to PC
Note
For more details see additional information in this section.
UNPACKING
Check the list under “Requirements” above and the packing sheet to insure all items have been
received.
The Printer/Cartridge is shipped separately and must be unpacked. Remove all packing material
(such as tape and tabs), and prepare to install the Printer/Cartridge first.
INSTALLING OR REPLACING THE PRINTER/CARTRIDGE
To install or replace the Printer/Cartridge, refer to Figure 2-2.