MagTek Excella, MICR Check Reader99875310 - Manual (Page 13)

Section 2. Installation
7
Figure 2-2. Installing or Replacing the Printer/Cartridge
1. Pull the Printer/Cartridge cover open to expose the Printer/Cartridge as shown in
the left bubble.
2. Push the Printer/Cartridge Tab down as indicated in the right bubble.
5. Remove the cartridge by pulling the handle on the Printer/Cartridge up.
6. Replace the Printer/Cartridge by inserting it into position shown in the illustration.
7. Close the Tab holding the Printer/Cartridge in position.
8. Close the Printer/Cartridge cover.
OPENING THE UNIT
The Outside Entry Guide, the Outside Exit Guide and the Printer/Cartridge Cover, shown in
Figure 2-1, can be opened to provide access to the check path and both scan bars. Open the unit
as described below: