MagTek Excella, MICR Check Reader99875310 - Manual (Page 35)

Appendix A. Built-In Web Page
29
MAC Address
The MAC (Media Access Control) address uniquely identifies each Excella device. This number
is assigned at the factory and cannot be changed.
IP Address
This is Excella’s device IP address on the network. Use this option to change the IP address
value. The default factory value is 192.168.10.100.
Subnet Mask
Use this option to change the Subnet Mask value. The default factory value is 255.255.255.0.
Gateway
Use this option to change the Gateway value. The default factory value is 0.0.0.0
IP Source
• Select the “Fixed” option if the values will be set manually using this page.
• Select the “DHCP” option if the Network server will dynamically assign these values (i.e. the
values on this page will be ignored). The server must be configured appropriately to use
DHCP.
“Cancel Changes” Button
Click on this button to cancel the current settings being displayed on this page.
“Save Settings” Button
Click on this button to save the current settings to the Excella device.