MagTek Excella, MICR Check Reader99875310 - Manual (Page 37)

Appendix A. Built-In Web Page
31
Gateway
Use this option to change the Gateway value. The default factory value is 0.0.0.0
IP Source
• Select “RNDIS”, the default option, if the values will be provided by the PC to which Excella
is being connected to (i.e., the values on this page will be ignored). It is recommended to run
the “ExcellaUSBConfig” utility (See Appendix B) on the PC to set these values when the
“RNDIS” option is selected.
• Select the “Fixed” option if the values will be set manually using this page.
“Cancel Changes” Button
Click on this button to cancel the current settings being displayed on this page.
“Save Settings” Button
Click on this button to save the current settings to the Excella device.