MagTek Excella, MICR Check Reader99875310 - Manual (Page 41)

35
APPENDIX B. USB CONFIGURATION UTILITY
OVERVIEW
MagTek’s “ExcellaUSBConfig” utility (Figure B-1) is used to configure Excella for the USB
interface ONLY. The utility will automatically select and configure IP address for the PC and
Excella.
Note
ExcellaUSBConfig must be run to establish
a connection between the PC and Excella.
After Excella API/Demo has been installed, ExcellaUSBConfig can be found on the following
directory: C:\Program Files\Magtek\Excella Demo.
Figure B-1. ExcellaUSBConfig Utility Screen