MagTek Excella, MICR Check Reader99875310 - Manual (Page 33)

Appendix A. Built-In Web Page
27
CONFIGURATION
The Configuration Pages, Figures A-4, A-5, A-6 and A-7 offer options to setup the Network,
Ethernet, and USB configurations. Additionally, an option is provided to save and restore device
(Figure A-8) configurations. A general description for all the options follows.
Network Configuration Tab
Figure A-4. Network Configuration Tab
Device Name
The Excella device name provided to the DHCP server (the network server must be setup
appropriately to use this option). This name must be unique for each Excella device on the
network. The default factory value is “EX” followed by the unit’s S/N (e.g. EX-A03LEY9).