MagTek InSpec 9000 - Manual (Page 11)

1
SECTION 1. FEATURES AND SPECIFICATIONS
The InSpec 9000 Encoded Card Tester measures parameters of magnetic stripe encoding. The
parameters are shown on a computer screen and compared with ISO (International Standards
Organization) standards. Because the parameters are presented as graphic illustrations, they are
easy to read and easy to understand. The Tester also provides performance trends based on a
database of test results.
FEATURES
•
Measures amplitude, bit size, and start sentinel, and compares results with ISO standards and
presents data in various graphs, charts and tables
•
Provides previous measurements of individual cards or daily summaries to establish trends
•
Presents card profile graphs of each measured parameter
•
Easily installed and easy to use Windows-based software
•
Uses specially provided cards for easy head cleaning
•
Maintains database files
•
On-site calibration from user collected data on a test card compared to a factory-provided
card
•
Security password to restrict access or permit controlled use access to certain data
REQUIREMENTS
Equipment needed to operate the Tester is either supplied by MagTek or the customer. These
items are listed below.
MagTek supplied
•
InSpec 9000 Card Tester hardware, P/N 39810003; Software-CD, Noise Detect, P/N
39810316
•
Cable, 9 pin male Tester to 9-pin female PC Adapter, P/N 21015823
•
Cable, power from Tester to wall receptacle, P/N 71100001
•
Cleaning Cards, P/N 96700004
•
Polishing Card, 0.5 micron (1), P/N 96700014
•
Test Cards (2), P/N 96600033
•
Setup Cards (2) - InSpec 9000, unit specified, P/N 96600036
•
Card Extraction Kit, P/N 39814801