MagTek InSpec 9000 - Manual (Page 41)

Section 4. Graphics Presentations
31
CARD PROFILES
The illustrations that follow are obtained from the ISO Parameters bar graph in Figure 4-1. To
obtain a graph of each parameter, press the button under the bar; for example, under Track 1,
press the Amplitude button under the red bar, and a screen showing the Track 1 Amplitude graph
will appear.
When the Add button is pressed, the card read is saved in the Database. If information is not to
be saved in the Database, do not press this button; press Cancel. The screen can be retrieved by
selecting View from the Main Menu and ISO Compliance.
Caution
If the information is to be saved, it is VERY important that correct
“Card Stock”, “Encoding System”, and “Shift” selections be
made BEFORE a card is entered into the reader. If this is not
done, the database and performance charts will not be meaningful.
To obtain numerical data of the entire graph, click on the button marked “Numerical”, and a
screen similar to Figure 4-2 will appear.