MagTek InSpec 9000 - Manual (Page 51)

Section 4. Graphics Presentations
41
Figure 4-10 Card Database Records
The first set of parameters is for identification listing the Date, Time, Card Stock, System, Shift,
and Track Number. The next set lists the actual parameter values.
The status will be 1 or 2: A number 1 means the card has been added to the database, and 2
means the card has not been added to the card database. To add to the database, press the Add
button on the ISO parameters (when a card is read). Press cancel when the card is not to be
added to the database.
Use the Record Selection bar at the bottom of this screen to start the search. The arrow with the
bar on the left locates the earliest card read for the database selection. The arrow with the bar on
the right locates the last card read. The other two arrows display one track of one card at a time
with the left arrow for earlier and the right arrow for later cards.