Aalborg DFM Digital - Manual (Page 68)

64
WARRANTY
Aalborg
7 Mass Flow Systems are warranted against parts and
workmanship for a period of one year from the date of purchase.
Calibrations are warranted for up to six months after date of purchase,
provided calibration seals have not been tampered with. It is assumed that
equipment selected by the customer is constructed of materials
compatible with gases used. Proper selection is the responsibility of the
customer. It is understood that gases under pressure present inherent
hazards to the user and to equipment, and it is deemed the responsibility
of the customer that only operators with basic knowledge of the equipment
and itslimitations are permitted to control and operate the equipment
covered by this warranty. Anything to the contrary will automatically void
the liability of Aalborg
7 and the provisions of this warranty. Defective
products will be repaired or replaced solely at the discretion of Aalborg
7 at
no charge. Shipping charges are borne by the customer. This warranty is
void if the equipment is damaged by accident or misuse, or has been
repaired or modified by anyone other than Aalborg
7 or factory authorized
service facility. This warranty defines the obligation of Aalborg
7 and no
other warranties expressed or implied are recognized.
TRADEMARKS
Aalborg7 is a registered trademark of Aalborg Instruments.
Buna7 is a registered trademark of DuPont Dow Elastometers.
Kalrez7 is a registered trademark of DuPont Dow Elastomers.
VCR7 is a registered trademark of Swaglok Marketing Co.
Viton7 is a registered trademark of Dupont Dow Elastometers L.L.C.
APPENDIX VI
ƽ CAUTION:
This product is not intended to be used in life support applications!