Campbell Scientific CC640 Digital Camera - Manual (Page 16)

CC640 Digital Camera
FIGURE 3. Insert and Align the Screwdriver to Open the Contact
The screwdriver supplied with the camera is used with the #19504. Align the
screwdriver by lightly inserting it in the square opening and at the angle shown.
This also points to the round hole paired with that square hole. “Feel” the flat
of the screwdriver meet the “flat” of the contact by turning lightly as the
screwdriver is positioned.
FIGURE 4. Open the Contact
When the screwdriver is aligned, push the screwdriver in while moving the
screwdriver to the position shown. You’ll feel pressure against the screwdriver
as it is opening the contact. The screwdriver will bottom out and will stay in
place so that wires can be inserter or removed as needed.
10