Campbell Scientific CVS4200 / BVS4300 Stationary Samplers - Manual (Page 56)

CVS4200 / BVS4300 Stationary Samplers
3. Press an ARROW key. Continue until
Pulse Input is shown on the display.
4. Press the ENTER key.
The display will show a new screen
containing the option title PULSE INPUT
on the top line and a 7 digit number with the
leftmost digit flashing to prompt for a
numeric input. To set the number of pulses
required to be input before a sample is taken,
by use of the ARROW keys, move the
flashing prompt until it is over the digit
requiring change.
Press a number key (0-9) to replace any
existing number and advance the flashing
prompt to the next digit to change. Replace
digits as required, then press ENTER.
The display will echo the last entry with
<ENTERED>.
Any wrong entries will require re-entry. If
ENTER has not been pressed, reposition the
prompt over the incorrect digit and replace
it. After ENTER has been pressed, the entire
entry must be redone from the beginning
(press SET).
The controller has now been given a new
value for SAMPLE INITIATION. The new
values reside in the NEW ENTRIES area of
the controller memory. To make these
changes active, press the RESTART key;
press it again to confirm your choice. The
controller will then wait until the required
pulses have been received before taking a
sample.
Summary of Sequence:
SET, SAMPLE INITIATION, ARROW(S), ENTER, #######, ENTER,
RESTART, RESTART.
48