Campbell Scientific CVS4200 / BVS4300 Stationary Samplers User Manual
Page 78
CVS4200 / BVS4300 Stationary Samplers
Press the ENTER key. If more information is
available for a given parameter, it will be
displayed. Continue pressing ENTER until no new
information is presented. The display will
“wrap-around” to its first message. Where timing
or counting are used, active values will be shown
which can be used to monitor the progress of the
parameter.
START DELAY
Press the VIEW key.
Press the START DELAY key.
Sequence: VIEW, START DELAY, ENTER,
(ENTER).
SAMPLE INITIATION
Press the VIEW key.
Press the SAMPLE INITIATION key.
Sequence: VIEW, SAMPLE INITIATION,
ENTER, (ENTER).
PROGRAM TYPE
Press the VIEW key.
Press the PROGRAM TYPE key.
Sequence: VIEW, PROGRAM TYPE, ENTER,
(ENTER).
OTHER OPTIONS
Press the VIEW key.
Press the OTHER OPTIONS key.
Use ARROW keys to navigate to desired option
on the flashing display.
Press ENTER to view.
Available options are:
Clock - Time, Date (including Day)
Purge Time - Time in seconds
Pinch Valve - Normally Open or Closed
Fault Shutdown - Enabled or Disabled
Sampler Status - Error and system messages that
have been lost from the display by keyboard
entry.
70