Pro-Lite PL-XPSB4014 (shown) - Manual (Page 15)

Setting the Password, current DATE/TIME, turning the BEEP OFF. (cont.)
10. The sign will read: MINUTE: 01. Key-in the current MINUTE(s).
Press ENTER .
11. The sign will read: 24 HOUR Y/N ?. Press Y to display the time as
MILITARY TIME (i.e. 01:00 p.m. = 13:00). Press N to display the time as
NORMAL TIME.
12. The sign will read: ID = 01. This setting is for software use only.
Press ENTER .
13. The sign will read: 9600 BAUD. This setting is for software use only.
Press ENTER .
14. The sign will read: BEEP ON. Press the right arrow key to turn the
"BEEP OFF". Press ENTER . The Advanced Settings are now set!
Editing your own graphics.
To edit your own graphic you must select an existing graphic and modify it.
1. Press RUN/STOP to stop the sign.
2. Press ESC to configure the Advanced Settings of the sign. The sign will
read: Gfx Rst Set
3. Press G for Editing Graphics. The sign will read: Gfx(A-Z)?A
4. Press A to edit existing GRAPHIC "A". The sign will read:
RGYBPI I I I
The concept is to use the arrow keys to move the "dot" to the
location where you want to draw. The following letters correspond to the colors
you can use: R = RED, G = GREEN, Y = YELLOW, B = BLACK, as well as
P = PLACE the "dot". Example: Press B to select the color black. Looking at
the sign, press the right arrow key a few times. As you will notice the red
dots have now been replaced with black dots. Now press G to select the color
green. Looking at the sign, press the left arrow key a few times. As you will
notice the black dots have now been replaced with green dots.
5. Press ESC to accept changes.
(See below to reset the graphics to their original state).
6. To display the edited GRAPHIC "A", please see page 4 on how to display
graphics.
Deleting a Page(s) or Graphic(s) you edited.
1. Press RUN/STOP to stop the sign.
2. Press DEL to delete a Page(s) or Graphic you edited. The sign will read:
Page Gfx
3. Press P to delete a Page(s) or press G to delete a Graphic(s).
4. In this example we want to delete a Page, so we will press the letter P .
The sign will read: Page (A-Z, Del)
8