Pro-Lite PL-XPSB4014 (shown) - Manual (Page 33)

26
Set Target
Use the Set Target feature to set-up a counter that will count down to a speci-
fied "target". At the same time, display a message that will show the current
count as the specified "target" approaches closer and closer.
To open the Set Target window, click on Functions on the menu bar, then click
on Set Target.
NOTE: Due to varying outlet frequencies, power outages and/or incorrect entry of information. Pro-Lite,
Inc. will not be responsible for counter inaccuracies.
There are three Set Target options:
1) Count Up
2) Count Down 3) Count Down by date
• If you select to Count Up and you set the TARGET to be reached 30
days from now, you can have your message read: "2 Days have
passed", "3 Days have passed", "4 Days have passed", . . .
See Count Up window.
• If you select to Count Down or Count Down by Date, and you set the
TARGET to be reached 30 days from now, you can have your mes-
sage read: "29 Days to reach our target", "28 Days to reach our tar-
get", "27 Days to reach our target",. .
See Count Down window and Count Down by Date window.
• Color Window
Select any one of four colors to edit an existing graphic or to create a graphic.
Current selected color.
Colors to select from:
black, red, green, yellow
• Edit Graphic Buttons
Functions of buttons are described below.
SAVE the current graphic displayed in the "Graphic" window.
Graphic name can be up to 25 characters. Graphic will be saved in the "Library".
DELETE a graphic from the "Library".
"Solid" graphics cannot be deleted.
Open a NEW "Graphic Window" for editing.
Revert a changed graphic back to its original state.
Will revert graphic from last saved state.
INSERT the current graphic in the "Graphic" window into your
message.
EXIT the "Edit Graphic" window.