Pro-Lite PL-XPSB4014 (shown) - Manual (Page 37)

6. Under "Printer name", type in the name you want for the Display
Printer Driver. This name must be 12 characters in length. Write the
"Printer name" below.
Printer name: ______________________________
In the example below we used the initials "F.D." to represent "Front
Desk". Select "No" to select the printer as the default printer and click
on "Next".
7. Click on "Finish" to complete the set-up. If prompted for the Windows 95
CD or disk, insert CD or disk into the proper drive and click "OK".
8. Now select the printer you created. Go to "File" and click on "Properties".
9. Click on the "Details" tab then click on "Port Settings".
10. Make sure the settings below are set accordingly. Click on "OK" when
done.
11. Click on the "Sharing" tab and click on "Shared As". In the "Share Name"
box, type in the 12 character "Printer name" you used in step 6. If you
want to "password protect" the use of the Display Printer Driver, type in a
password in the "Password" box. Only the user with the password can
access the "Printer Driver" to send a message to the display.
12. RSC Printer Driver set -up complete.
Set to the "BAUD RATE"
setting on PAGE 23.
Settings should be
as shown.
30