Pro-Lite PL-XPSB4014 (shown) - Manual (Page 34)

27
1. Count Up window
• Day/Hour: select to "count up" in Days or Hours,
• Start: specify a "start point”. For example: If you wanted to
start the counter in 10 days, enter 0010.
If you selected Day, your "start point” will automatically be in days. If you select-
ed Hour, your "start point" will automatically be in hours.
• Target: specify a "target" day or hour, For example: If you
wanted the "target" to be reached in 125 days, enter 0125.
• Page: select the Page you want to run when the "target" Is
reached. For example: If you wanted to run Page D when the
"target" is reached, select the letter D.
2. Count Down window
• Days: specify how many days to start counting from, For
example: If you wanted to "count down" from 125 days, enter
0125.
If you enter any number other than 0000 for Days, your selections for Hours
and Minutes below should be based on the current time.
• Hours: select the hour you wish to "count down" from. For
example: If you wanted to "count down" from 12 hours, select
12.
• Minutes: select the minutes you wish to "count down" from,
For example: If you wanted to "count down" from 25 minutes,
select 25.
• Page: select the Page you want to run when the "target" is
reached. For example: If you wanted to run Page D when the
"target" is reached, select the letter D.
3. Count Down by Date window
4. Displaying the Current Count Variables in your message
1)
Go to the part of your message where you want the Current
Count Variable to be displayed.
2) Click on Commands on the menu bar, then click on Target.
3) Click on the Current Count Variable you wish to use.
Please Note: (Count Down) variables = apply to count down only;
(Count Up) variables= apply to count up only.
Enter the "target"
month, date, and year.
Enter the "target" hour,
minutes and seconds.
Select the Page letter to
run when the "target" is
reached.
Sets the counter on the
sign for the specified
entries.