Pro-Lite PL-XPSB4014 (shown) - Manual (Page 16)

Deleting a Page(s) or Graphic(s) you edited. (cont.)
5. At this time you can Key-in any "PAGE LETTER" to delete or you can
press the DEL key to delete all the Pages.
6. Press A to delete PAGE "A".
7. The screen will read: Del: A (Y/N)?. Press Y for YES or N for NO.
Your selection has now been accepted. To delete a Graphic(s), select "G"
for Graphics in Step 3.
NOTE: Deleting a graphic will restore the graphic to its original state.
NEW AND IMPROVED FEATURES
Turning OFF the TRIVIA using the FUNCTION key.
1. While your message is running, press the FUNCTION key.
2. The TRIVIA is now OFF.
3. To turn the TRIVIA ON press the FUNCTION key again.
NOTE: This setting will be retained in memory whenever power is removed.
Please see page 16 on instructions to permanently remove the TRIVIA.
SLOWING the SPEED of the sign using the arrow keys.
1. While your message is running, press the down arrow key to reduce
the speed.
2. To increase the speed press the up arrow key.
NOTE: If power is removed from the sign, the SPEED will default to fast.
DIRECT RUN Page feature!
Let's say you have Pages "A", "B", and "C" programmed. If Page "A" is currently
running and you wanted to run Page "C", just press C . The same applies to
any other Page programmed.
Turning OFF the sign without removing the power cord.
1. While your message is running, press the ON/OFF key.
2. Your display should now be OFF.
3. To turn ON the sign just press the ON/OFF key again.
RESETTING the system.
This is an excellent feature when you just want to start from the beginning.
CAUTION: This will delete all your previously stored information.
1. Press RUN/STOP to stop the sign.
2. Press ESC to configure the Advanced Settings of the sign.
The sign will read: Gfx Rst Set.
3. Press R for Reset. The sign will read: SURE (Y/N)?.
4. Press Y for YES or N for NO.
5. Your selection has now been accepted.
9