Pro-Lite PL-XPSB4014 (shown) - Manual (Page 18)

"Count Down" to TARGET setup
1. Begin by pressing RUN/STOP to stop the sign. Press the TARGET key.
2. The sign will read: Count Up/Dn. Press D to count DOWN to a TARGET.
3. The sign will read: DAY: 0000. Key-in the number of days to start counting
down from. For example: If you wanted to count down from 125 days,
press 1 2 5 . The sign will display: DAY: 0125
4. Press ENTER . The sign will read: HOUR 00. Key-in the current hour.
For example: If the hour is currently 10, press 1 0 .
The sign will display: HOUR: 10
5. Press ENTER . The sign will read: MINUTE: 00. Key-in the current min-
utes. For example: If the minutes are currently 23, press 2 3 .
The sign will display: MINUTES: 23
6. Press ENTER . The sign will read: PAGE (A-Z)? A. Key-in the PAGE
LETTER you want to run when the TARGET is reached. For example: If
your TARGET message is in Page "D", press D .
7. Press ENTER to confirm your entry and to start the counter.
8. The sign will read: STOP MODE. Press RUN/STOP to run your message.
Displaying a "Count Up" to TARGET variable in your message
Go to the part of your message where you want to display the variable. In this
example we want to display the "Current Count" variable.
1. Press the FUNCTION key. The sign will read: (AUTO): A
2. Now press the key until the sign reads:( COUNT): 2
TIP: Use the key to go back if you scroll too far.
3. Press ENTER . The sign will read: (COUNT)
4. Press SPACE . Press RUN/STOP to run your message.
Displaying a "Count Down" to TARGET variable in your message
Go to the part of your message where you want to display the variable. In this
example we want to display the current "DAYS LEFT" variable.
1. Press the FUNCTION key. The sign will read: (AUTO): A
2. Now press the key until the sign reads:(DAYS LEFT): 3
3. Press ENTER . The sign will read: (DAYS LEFT)
4. Press SPACE . Press RUN/STOP to run your message.
NOTE: There are a 2 "Count Up" to TARGET variables and 4 "Count Down" to
TARGET variables that can be selected to display in your message. Please
refer to the Quick Reference Section, page 15.
NOTE: Please note that when selecting to display a Count Up or Count Down
TARGET variable(s), only the number(s) will be shown. The user will be
required to input the required text, if any, to define the variable being displayed.
11