Pro-Lite PL-XPSB4014 (shown) - Manual (Page 35)

28
Send by Schedule
The Send by Schedule icon is used to schedule a message to be sent
from the computer to sign on the specified date and time. In order for this
feature to work, the sign MUST always be connected to the computer. In addi-
tion, the Pro-Lite Software program must be running in the background mode.
To run the software in the background mode, simply start the TruColorlI
Software program and minimize the screen.
1. Click on the Send by Schedule icon on the toolbar.
• To set-up a new schedule, click on "Add". Go to Step 2
• To modify an existing schedule, click on the schedule you wish to
modify then click on "Modify".
• To delete an existing schedule, click on the schedule you wish to
delete, then click on "Delete".
2. Setting a new schedule.
• Click on "Browse" to select an existing message file to schedule.
• Enter the "Date" & "Time" you want the message to be sent to the
sign. NOTE: Hour must be entered as military time (1 p.m.=13).
• Enter the "Sign ID Number" from page 23.
• Select the "Page Number" you want the message to be sent to.
Use to repeat the message
HOURLY, DAILY, or MONTHLY.
If HOURLY, is selected, the entries
entered in the Date window will be
ignored.
If DAILY is selected. the date entered in
the Date window will be ignored.
If MONTHLY, is selected, the month
entered in the Date window will be
ignored.
Schedules are based using the clock
from the computer.