Allied Telesis AT-10408XP - Manual (Page 18)

Chapter 1: Overview
18
Ports
The AT-10408XP 10-Gigabit Ethernet Switch features the following ports:
eight XFP ports, one 10/100/1000Base-T in-band management port, and
one RS-232 terminal port.
XFP Ports
The eight XFP (10-Gigabit small form factor pluggable) slots support
10GBase-R XFP transceivers.
10/100/1000
Base-T In-band
Management
Port
The RJ-45 10/100/1000Base-T in-band management port allows you to
make a remote connection to the switch through Telnet. This port
functions only for network management; it cannot pass switch traffic from
any other port.
RS-232 Terminal
Port
Through the terminal port you can make a local connection to the switch
and use the command line AT-S83 management software user interface.
This is an out-of-band management port.