Installing the switch on a desktop – Allied Telesis AT-10408XP User Manual
Page 32
Advertising
Chapter 2: Installation
32
Installing the Switch on a Desktop
You can place AT-10408XP 10-Gigabit Ethernet Switch on a desktop or
install it in a 19-inch rack. To install the switch in a rack, refer to “Installing
the Switch in a Rack” on page 33.
To place the switch on a desktop, perform the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Place the switch on a flat, secure surface (such as a desk or table)
leaving ample space around the unit for ventilation.
Advertising