Allied Telesis AT-10408XP - Manual (Page 20)

Chapter 1: Overview
20
SD Card Slot
LED
The SD card slot has one LED as shown in Figure 5 and described in
Table 3.
Figure 5. SD Card Slot LED
Table 2. Management Port LED
LED Color State Description
L/A Green On A valid link has been established on the
port at 1000 Mbps.
Blinking The port is transmitting or receiving data.
Amber On A valid link has been established on the
port at 10 or 100 Mbps.
Blinking The port is transmitting or receiving data.
None Off No link.
Table 3. SD Card Slot LED
LED Color State Description
Normal Green On The SD card is inserted in the slot and
has been successfully detected.
Busy Green Blinking An SD card is inserted in the slot and is
being accessed by the switch. DO NOT
REMOVE THE SD CARD.
Fault Amber Blinking The SD card is not valid or the system
cannot successfully read or write to the
SD card.
1208
STATUS
FAULT
MASTER
SD
BUSY
NORMAL
FAULT
LED