Allied Telesis AT-S62 - Manual (Page 138)

Chapter 12: Classifiers
138 Section II: Advanced Operations
Creating a Classifier
To create a new classifier, perform the following procedure:
1. From the Home Page, select Configuration.
2. Select the Network Security or Services menu selection. (The
Classifier tab is accessible from both menu selections.)
3. Select the Classifier tab.
An example of the Classifier tab is shown in Figure 33.
Figure 33. Classifier Tab (Configuration)
The tab lists the current classifiers on the switch. The columns are
defined here:
ID
The ID number of the classifier.
Description
A description of the classifier.
No. Refs. (Active)
The number of active ACLs and QoS policies to which the classifier is
currently assigned. An active ACL or QoS policy is assigned to at least
one switch port.