Allied Telesis AT-S62 - Manual (Page 179)

AT-S62 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 179
The Scheduling tab is shown in Figure 51.
Figure 51. Queuing and Scheduling Tab
Note
The Configure Egress Weights section in the tab is explained in the
next procedure, “Configuring Egress Scheduling” on page 180.
4. In the Configure CoS Queues to Egress Queues section of the tab,
click the list for a CoS priority whose queue assignment you want to
change and select the new queue.
For example, to direct all tagged packets with a CoS priority level of 5
to egress queue Q3, you would use the list in CoS 5 to PQ and select
Q3 - QoS PriorityQ 3.
5. If desired, repeat Step 4 to change the egress queue assignments of
other CoS priorities.
6. Click Apply. A change to a mapping of a CoS priority to an egress
priority queue is immediately implemented on the switch.
7. To permanently save the change, click the Save Config menu option.