Allied Telesis AT-S62 - Manual (Page 55)

AT-S62 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 55
Note
If the window does not have an Enhanced Stacking tab, you have
accessed the switch through enhanced stacking. Changing a
switch’s stacking status through enhanced stacking is not allowed.
The only stacking status you can change remotely from a web
browser management session is the switch on which you started the
session.
The Enhanced Stacking tab is shown in Figure 9.
Figure 9. Enhanced Stacking Tab
4. Click the desired enhanced stacking status for the switch. The default
is Slave.
5. Click Apply.
The new enhanced stacking status is immediately activated on the
switch.
6. To permanently save the change, click the Save Config menu
selection.