Allied Telesis AT-S62 - Manual (Page 366)

Chapter 29: Management Access Control List
366 Section VII: Management Security
Deleting an ACE
To delete an ACE, perform the following procedure:
1. From the Home Page, select Configuration.
2. Select the Mgmt Security menu option.
The Mgmt ACL tab is shown in Figure 119 on page 363.
3. Click the circle next to the ACE you want to delete. You can delete
only one ACE at a time.
4. Click Delete.
The ACE is deleted from the Management ACL.
Note
If you delete the ACE that specifies your management workstation
while the Management ACL is active, your web browser
management session will end and you will not be able to reestablish
it.
5. To permanently save your changes, select the Save Config menu
selection.