Allied Telesis AT-S62 - Manual (Page 152)

Chapter 13: Access Control Lists
152 Section II: Advanced Operations
Description
Use this field to enter a description for the ACL. A description can be
up to 15 alphanumeric characters, including spaces. Entering a
description is optional.
Port List
Use this list to specify the port where you want to assign the ACL. You
can assign an ACL to more than one port. To select multiple ports, hold
down the Ctrl key while making your selections. To remove the ACL
from its current port assignments without assigning it to any new ports,
hold down the Ctrl key while deselecting the currently assigned ports.
An ACL that is not assigned to any port is considered inactive.
6. Click Apply.
Changes to the ACL are immediately implemented on the switch.
7. To permanently save your changes, select the Save Config menu
selection.