Allied Telesis AT-S62 - Manual (Page 298)

Chapter 21: Port-based and Tagged Virtual LANs
298 Secton V: Virtual LANs
Creating a New Port-based or Tagged VLAN
To create a new port-based or tagged VLAN, perform the procedure
below:
1. From the Home Page, select Configuration.
2. Select the Layer 2 menu selection.
3. Select the VLAN tab.
The VLAN tab is shown in Figure 101.
Figure 101. VLAN Tab (Configuration)
Note
The Modify and Remove buttons are not included in the tab if the
only VLAN on the switch is the Default_VLAN.
The VLAN Mode and Uplink Port options are explained in “Selecting a
VLAN Mode” on page 307. The Mgmt. VLAN ID option is explained in
“Specifying a Management VLAN” on page 308.