Allied Telesis AT-S62 - Manual (Page 134)

Chapter 7: SNMPv3 Commands
134
storagetype Specifies the storage type of this table entry. This is an
optional parameter. The options are:
volatile Does not allow you to save the table
entry to the configuration file on the
switch. This is the default.
nonvolatile Allows you to save the table entry to
the configuration file on the switch.
Description
This command modifies an SNMPv3 Access Table entry.
Examples
The following command modifies the group called engineering. The
new read view is the Internet MIBs and the storage type is volatile
storage.
set snmpv3 access=engineering securitymodel=v3
securitylevel=authentication readview=internet
storagetype=volatile
The following command modifies the group called training. The read
view, write view, and notify view are set to the Internet MIBs. The storage
type is nonvolatile storage.
set snmpv3 access=training securitymodel=v3
securitylevel=privacy readview=internet
writeview=internet notifyview=internet
storagetype=nonvolatile