Allied Telesis AT-S62 - Manual (Page 70)

70
Chapter 5
Simple Network Time Protocol
(SNTP) Commands
This chapter contains the following commands:
❑ ADD SNTPSERVER PEER|IPADDRESS on page 71
❑ DELETE SNTPSERVER PEER|IPADDRESS on page 72
❑ DISABLE SNTP on page 73
❑ ENABLE SNTP on page 74
❑ PURGE SNTP on page 75
❑ SET DATE TIME on page 76
❑ SET SNTP on page 77
❑ SHOW SNTP on page 78
❑ SHOW TIME on page 79
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software Menus Interface User’s
Guide for background information on SNTP.