Allied Telesis AT-S62 - Manual (Page 377)

AT-S62 Command Line User’s Guide
377
SHOW DOS
Syntax 1
show dos [ipaddress] [subnet] [uplinkport]
Syntax 2
show dos defense port=port
Parameters
ipaddress Displays the IP address of the LAN.
subnet Displays the subnet mask.
uplinkport Displays the uplink port for the Land defense.
defense Displays the status of a specified defense for a
particular port. Defense can be any of the following:
❑ synflood
❑ smurf
❑ land
❑ teardrop
❑ ipoption
❑ pingofdeath
port Specifies the port whose DoS status you want to
view. You can specify only one port.
Description
These commands display DoS status information. Syntax 1 displays the
current settings for the IP address, subnet mask, and uplink port
parameters. Syntax 2 displays DoS status information for a specified
defense mechanism on a specified port.
Examples
The following command displays the IP address and subnet mask for the
Land and SMURF defenses:
show dos ipaddress subnet