Allied Telesis AT-S62 - Manual (Page 37)

AT-S62 Command Line User’s Guide
37
❑ SET PASSWORD OPERATOR on page 59
❑ SET SWITCH CONSOLETIMER on page 60
❑ SET SYSTEM on page 61
❑ SET USER PASSWORD on page 62
❑ SHOW ASYN on page 63
❑ SHOW CONFIG on page 64
❑ SHOW DHCPBOOTP on page 65
❑ SHOW IP INTERFACE on page 66
❑ SHOW IP ROUTE on page 67
❑ SHOW SWITCH on page 68
❑ SHOW SYSTEM on page 69
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software Menus Interface User’s
Guide for background information on basic switch parameters.