Allied Telesis AT-S62 - Manual (Page 80)

80
Chapter 6
SNMPv1 and SNMPv2 Community
Strings and Trap Commands
This chapter contains the following commands:
❑ ADD SNMP COMMUNITY on page 81
❑ CREATE SNMP COMMUNITY on page 83
❑ DELETE SNMP COMMUNITY on page 86
❑ DESTROY SNMP COMMUNITY on page 88
❑ DISABLE SNMP on page 89
❑ DISABLE SNMP AUTHENTICATETRAP on page 90
❑ DISABLE SNMP COMMUNITY on page 91
❑ ENABLE SNMP on page 92
❑ ENABLE SNMP AUTHENTICATETRAP on page 93
❑ ENABLE SNMP COMMUNITY on page 94
❑ SET SNMP COMMUNITY on page 95
❑ SHOW SNMP on page 97
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software Menus Interface User’s
Guide for background information on SNMP.