Allied Telesis AT-S62 - Manual (Page 350)

350
Chapter 22
Power Over Ethernet Commands
This chapter contains the following commands:
❑ DISABLE POE PORT on page 351
❑ ENABLE POE PORT on page 352
❑ SET POE PORT on page 353
❑ SET POE THRESHOLD on page 355
❑ SHOW POE CONFIG on page 356
❑ SHOW POE STATUS on page 357
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software Menus Interface User’s
Guide for background information on Power over Ethernet (PoE).