Allied Telesis AT-S60 - Manual (Page 191)

AT-S60 Management Software User’s Guide
Section II: Advanced Features 191
5. Click on the Protocol field and select as the transfer protocol either
Xmodem or 1K XModem.
Note
The transfer protocol must be Xmodem or 1K Xmodem. The
recommended transfer protocol is 1K Xmodem because it is much
faster than the Xmodem protocol. For a faster download, set the
console baud rate to 115200. Refer to Starting a Local Management
Session on page 40 for information on setting the console baud rate.
6. Click Receive.
The Receive filename window is displayed, as shown in Figure 57.
Figure 57 Receive Filename Window
7. Enter a name for storing the uploaded file.
The Xmodem file receive window is displayed, as shown in
Figure 58.
Figure 58 Xmodem File Receive Window