Allied Telesis AT-S60 - Manual (Page 421)

AT-S60 Management Software User’s Guide
Section IV: VLANs 421
Creating a Port-based or Tagged VLAN
To create a new port-based or tagged VLAN, perform the following
procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
The VLAN Menu is shown in Figure 130 on page 418.
2. From the VLAN Menu, type 1 to select Configure VLAN.
The Configure VLAN Menu is shown in Figure 133.
Figure 133 Configure VLAN Menu
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
High School Switch 142
User: Manager 00:14:33 01-Jan-2003
Configure VLAN
1 - Set Management VLAN ID ........ 1 (Default_VLAN)
2 - Set VLAN Mode ................. User Configured
3 - Set Uplink Port ............... None
4 - Configure Port-Based VLAN
D - Reset to Default VLAN
R - Return to Previous Menu
Enter your selection?