Specifying ports – Allied Telesis AT-S60 User Manual
Page 34
34
Specifying Ports
Many of the commands and parameters, in this manual involve
specifying the port(s) on the switch. Port numbers are specified in the
following format:
slot.port
Slot is the number of the slot in the switch that contains the line card.
There are twelve line card slots in the AT-8400 chassis. Port is the port
number on the line card. For example, to indicate port 4 on the line card
in Slot 8, enter:
8.4
In many commands, you can specify a list of ports. You can list ports on
the same line card individually, as a range, or both. The following
example refers to Ports 1, 3, and 5 through 8 on the line card in Slot 3:
3.1,3,5-8
Some commands can be performed on ports on different line cards. The
following example refers to Ports 1 and 4 on the line card in Slot 4 and
Ports 6 through 8 on the line card in Slot 11:
4.1,4,11.6-8