Allied Telesis AT-S60 - Manual (Page 785)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 785
4. Click on the ports to display their security status.
After you click on a port, it turns white. You can select multiple
ports to display. (To deselect a port, click it again.)
5. Click View.
The Security for Ports Page is shown in Figure 290. This page
displays the current security levels of the ports you selected.
Figure 290 Security for Ports Page
Following is a description of the headings that appear in the
Security for Ports Page:
Port
Identifies the port in the AT-8400 switch in the following format:
slot number of line card. port number
Security Mode
There are four levels of port security:
❑ Automatic: The Automatic security mode disables port security. It
is the default security level for the ports.
❑ Limited: You can use the Limited security level to manually specify
a maximum number of dynamic MAC addresses that each port
can learn.
❑ Secured: The Secured security level instructs a port to forward
frames based solely on its static MAC address.