Allied Telesis AT-S60 - Manual (Page 677)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 677
Figure 233 Expanded RSTP Spanning Tree Tab
4. In the Configure RSTP Parameters section, adjust the parameters as
desired. The parameters are defined below.
Force Version
This selection determines whether the bridge operates with RSTP
or in an STP-compatible mode. The default is RSTP. If you select
RSTP, the bridge operates all ports in RSTP, except for those ports
that receive STP BPDU packets. If you select Force STP
Compatible, the bridge operates all ports in STP.
Bridge Priority
The priority number for the bridge. This number is used in
determining the root bridge for RSTP. The bridge with the lowest
priority number is selected as the root bridge. If two or more