Cleaning – Blodgett SB-G Series User Manual

Page 19

Advertising
background image

OM-G-SB 17

Cleaning

13. Set steamer timers for 10 minutes.

14. When steamer timers sound, turn them to OFF and open the doors.

15. When the fans have stopped, remove fan baffle partitions using protective

gloves, and rinse with clean water.

16. Completely wipe out steamer chambers using a degreaser and nylon pad, if

necessary. Rinse thoroughly with clean water.

17. Replace fan baffle partitions.

18. Wait 10 minutes for the compartments to air dry, then close the steamer

doors.

19. Turn the on/off switch OFF, and slowly open the manual drain valve.

20. When the boiler has drained completely, close the manual drain valve and

turn the on/off switch to “ON” to fill the boiler with water.

21. After the RESET light comes on, press the start switch.

22. Allow boiler pressure to develop.

23. Set steamer timers for 10 minutes.

24. When steamer signal sounds, turn timers off.

25. If the boiler is not to be used, it may be turned off. It is ready for normal

operation.

WARNING

SOLUTION AND VALVES WILL BE VERY HOT,

AND MAY CAUSE BURNS. PROTECT HANDS

FROM HOT SURFACES AND CONTINUE TO

USE PROTECTIVE GLOVES.

Advertising